Just about ready to take the ol girl on the road, everything back together, only a few extra parts that I have no idea where they go and a couple of small pieces missing but not critical.
I put in new head bearings, tried to adjust as best I could while on the center stand but don't really know what I am looking for. Right now the left to right is very light, no drag or hitting the tank. There isn't any drag at all. Should there be a slight bit of friction?
Once I get her out on the road I will guess that its going to feel like a new ride. I am going to take it nice and slow to make sure that everything is working and then work my speed up, maybe go to a large parking lot and do some figure 8's, slalom between some lane markers to see if further adjustments are needed.
I this the more or less correct way to aproach the adjustment?
Thanks
Jack
I put in new head bearings, tried to adjust as best I could while on the center stand but don't really know what I am looking for. Right now the left to right is very light, no drag or hitting the tank. There isn't any drag at all. Should there be a slight bit of friction?
Once I get her out on the road I will guess that its going to feel like a new ride. I am going to take it nice and slow to make sure that everything is working and then work my speed up, maybe go to a large parking lot and do some figure 8's, slalom between some lane markers to see if further adjustments are needed.
I this the more or less correct way to aproach the adjustment?
Thanks
Jack
Comment