Tweet
i dont know if the bodys are the same... sorry. but i do know if you run a search there is a thread that explains how to get broken screws out of the carbs.
-
Gary Chenoweth
1979 xs 1100 standard w/mods "cujo" Nows needs a home
Some mods include:
stage 2
4 to 1
pods
need paint help on tank though.
other bikes are:
03 shadow
01 monster
93 gsxf 650/mods -
Unfotunately I have tried all of the tech tricks and to no avail , So I may see if a machine shop can fix it . However I am hoping to find a carb assembly so that if it happens again I'll have extra parts.1980 XS1100 special
1976 RD400
1981 KZ1000Comment
-
have you tried e bay? as far as the 650 i do have one but it is a twin. i dont know if they will fit but you can have them for shipping cost.Gary Chenoweth
1979 xs 1100 standard w/mods "cujo" Nows needs a home
Some mods include:
stage 2
4 to 1
pods
need paint help on tank though.
other bikes are:
03 shadow
01 monster
93 gsxf 650/modsComment
-
I'll look into it. All I need is the same carb body I'll get some identity markings off of mine and we may be able to figure it out.1980 XS1100 special
1976 RD400
1981 KZ1000Comment
-
cool let me know. the 650 is a 1976 650 special that is dead but does have some usable parts.Gary Chenoweth
1979 xs 1100 standard w/mods "cujo" Nows needs a home
Some mods include:
stage 2
4 to 1
pods
need paint help on tank though.
other bikes are:
03 shadow
01 monster
93 gsxf 650/modsComment
-
XS650 carbs look different.Comment
-
The 650 was in production a long time. As with the XS11, various carbs were used over the years. I believe that they used a BS34 rev.2 just like the 78-79 XS11 at one point. Obviously, the linkages and fuel tees are different, but you shouldn't have any trouble. The Yamaha fiche online will be your best bet. Grab your favorite beverage and look up the 11 to get your carb P/N and or exploded view. Then look up successive years of the 650 to match it up. I'd start with '76 or '77 and move up from there. If you don't see a match by 1980, well... Anyway, be careful as the BS38 looks very similar. Heck, they all look the same. Hope that wasn't "carbist" (All you Mikunis look alike...)2010 Kawasaki Z1000
1979 SF: Millennium Falcon, until this SaturdayComment
-
carbs
Do they look like the carbs you have on your xs? no point in putting you through the removing of them if they won't be useful.
Unfortunately mine have no obvious markings on them as to what part number they are , anyone know where to look on these for numbers ?
I will also see if I can't figure out from the fiche files if they are the same body1980 XS1100 special
1976 RD400
1981 KZ1000Comment
-
so xs650 might have the same carbs...ever cool...there is a xs650 in the paper...would tack cables and speedo and other parts be the same...witch carb do u nee 1-4...might be able to help u...i need carb 1 for a 80...broke mineComment
-
Put a single 38mm flatslide mikuni on a 750 Norton and it'll run perfect.Comment
Comment