Announcement

Collapse
No announcement yet.

Ignition pickups and harness

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ignition pickups and harness

    I had some problems with the wires that go to the pickup coils.I took it apart and found that the prevous owners have repaired the wires 3 times. Yes I have 6 splices in the harness of pickup coils.The last of the repairs are about 3/8" from the pickups.This leaves me almost no room to make any other repairs are these parts still available new.I would like to buy the pickups and the harness as a complete set to avoid any splices at all.Please give me any links to suppliers that may have them.Thanks!
    Dan ( A.K.A.- MacGyver )

  • #2
    Hey Dan,

    It's still available from BikeBandit at least, if not also Yamaha, so you might try calling Zanotti's to compare prices with BikeBandit:

    Below, BikeBandit Part# and price for 78E!
    2: PULSER COIL ASY 22830-001 $106.98

    However, 3/8" should be enough to be able to apply some solder and a new wire onto the pickup coils, just get some good flexible wire like what's mentioned in the repair tech tip....test lead, etc.!?

    T.C.
    T. C. Gresham
    81SH "Godzilla" . . .1179cc super-rat.
    79SF "The Teacher" . . .basket case!
    History shows again and again,
    How nature points out the folly of men!

    Comment


    • #3
      Thanks!

      I bought the part from BikeBandit and it is on its way! Thanks for the help! Dan.
      Dan ( A.K.A.- MacGyver )

      Comment

      Working...
      X