how do you diagnose the state of your idle if you dont have one of those colour tune plugs?
Announcement
Collapse
No announcement yet.
idle circuits
Collapse
X
-
Re: idle circuits
Originally posted by ScottS2488
how do you diagnose the state of your idle if you dont have one of those colour tune plugs?
GeezerHi my name is Tony and I'm a bikeoholic.
The old gray biker ain't what he used to be.
-
1st time I used a ColorTune it uncovered one cylinder that had spark but no combustion under 4,000 RPM.
Turned out to be a bad pilot jet. Bike was running on 3 cyl until just over 4K RPM then the 4th cylinder fired-up.
New pilot jets have it purring (like a caged tiger) through the entire RPM range.
To be honest, I never knew there was a problem. Idle had an "angry growl" to it and higher RPM power was like all of us have.
If I did the WOT chop test and read the plugs I'd have never found the problem.
I don't know if an analizer would have uncovered which cylinder it was. All these tool/techniques can be used to advantage. I wouldn't shy away from any of them.Pat Kelly
<p-lkelly@sbcglobal.net>
1978 XS1100E (The Force)
1980 XS1100LG (The Dark Side)
2007 Dodge Ram 2500 quad-cab long-bed (Wifes ride)
1999 Suburban (The Ship)
1994 Dodge Spirit (Son #1)
1968 F100 (Valentine)
"No one is totally useless. They can always be used as a bad example"
Comment
Comment