Don't Buy These Brake Pads

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bubba1954
    Truly XSive
    • Apr 2004
    • 114
    • Hutchinson, Kansas

    #1

    Don't Buy These Brake Pads

    I would advise everyone to not buy these generic brake pads from this dealer on ebay.



    I ordered a set for my '79 XS1100 std and they failed to fit properly out of the package. After a lot of fitting with a good Basturd file, I finally got them to fit freely without dragging. Once they got seated to the rotor, they began to squeek like hell. They do stop the bike well, but I hate all the stares at the intersections when I apply the brakes. I pulled them off and found that nothing was rubbing the rotors except for the brake pads. It must be the high metal and copper content used in the pad composition. I thought that I would save money with these, NOT! I just ordered a quality set from Dennis Kirk.
    Bubba1954
    (aka) Shannon Koehn
    Hutchinson, KS
    http://www.fototime.com/inv/0EE87CEC5C8C774
  • Geezer
    XS-XJ Guru
    • May 2003
    • 2985
    • Willamina, Oregon 97229

    #2
    Re: Don't Buy These Brake Pads

    Originally posted by Bubba1954
    I would advise everyone to not buy these generic brake pads from this dealer on ebay.



    I ordered a set for my '79 XS1100 std and they failed to fit properly out of the package. After a lot of fitting with a good Basturd file, I finally got them to fit freely without dragging. Once they got seated to the rotor, they began to squeek like hell. They do stop the bike well, but I hate all the stares at the intersections when I apply the brakes. I pulled them off and found that nothing was rubbing the rotors except for the brake pads. It must be the high metal and copper content used in the pad composition. I thought that I would save money with these, NOT! I just ordered a quality set from Dennis Kirk.
    Squealing doesn't mean they're bad. Sometimes even top quality pads squeal.

    Go to a local auto parts store and get a tube of Bendix anti-squeal compound. Don't read the instructions because they tell you to squeeze some on and then reassemble. Put a layer of the goo on the back of the pads then set them in the sun (face down) until the goo is completely dry (2-3 hours on a sunny day.) When the compound is dry, then reassemble them. Odds are the squeal will be history. I have some other tricks if this doesn't entirely kill the squeal.

    May years ago my brother and I both had Suzuki 750 triples. I put new Vesera race quality pads in both of them one day and his were silent and my squealed like a stuck pig. I did everything I could think of but the squeal persisted. Then one day they were fully broken in and my breaking became silent. About that time I got a call from my brother, it seems his brakes started to squeal. ;o)

    Geezer
    Last edited by Geezer; 07-19-2004, 12:17 AM.
    Hi my name is Tony and I'm a bikeoholic.

    The old gray biker ain't what he used to be.

    Comment

    • Bubba1954
      Truly XSive
      • Apr 2004
      • 114
      • Hutchinson, Kansas

      #3
      Thanks Tony. I will give that a try. I once had an '81 Honda 750 with rear shoes that acted similarly until I replaced the shues with a non-metalic composition set. I wasn't aware that there was a way to end the squeeling without replacement.
      Bubba1954
      (aka) Shannon Koehn
      Hutchinson, KS
      http://www.fototime.com/inv/0EE87CEC5C8C774

      Comment

      • Snow
        XS-XJ Guru
        • Oct 2002
        • 1041
        • Tallahassee, FL

        #4
        Those pads are for Specials, not Standards.
        1979 XS11F Standard - Maya - 1196cc (out of order)
        1978 XS11E Standard - Nina - 1101cc
        http://www.livejournal.com/~xs11

        Comment

        • Bubba1954
          Truly XSive
          • Apr 2004
          • 114
          • Hutchinson, Kansas

          #5
          I bought the std versions from him. he sells all models but they are junk.
          Bubba1954
          (aka) Shannon Koehn
          Hutchinson, KS
          http://www.fototime.com/inv/0EE87CEC5C8C774

          Comment

          • Snow
            XS-XJ Guru
            • Oct 2002
            • 1041
            • Tallahassee, FL

            #6
            Ok, will avoid the guy - I only did a very quick search through his feedback and only saw special pads.

            Thanks for warning the rest of us
            1979 XS11F Standard - Maya - 1196cc (out of order)
            1978 XS11E Standard - Nina - 1101cc
            http://www.livejournal.com/~xs11

            Comment

            • Meista007
              Truly XSive
              • Feb 2003
              • 107
              • Ohio

              #7
              I bought a set a std pads from him by mistake. I have a special and don't need them.

              Comment

              • Geezer
                XS-XJ Guru
                • May 2003
                • 2985
                • Willamina, Oregon 97229

                #8
                Contact the seller and ask for an exchange. If he won't give you an exchange, let me know how much you want for them. I could use a spare set of pads.

                Geezer
                Hi my name is Tony and I'm a bikeoholic.

                The old gray biker ain't what he used to be.

                Comment

                • chevy45412001
                  XS-XJ Guru
                  • Mar 2003
                  • 1412
                  • Jacksonville Florida

                  #9
                  anti sqwek

                  i use rtv blue or gold on my pads,car also. never had a sqweel,same rules aply put on let fully dry install.
                  1982 XJ 1100
                  going strong after 60,000 miles

                  The new and not yet improved TRIXY
                  now in the stable. 1982 xj11, 18,000miles

                  Comment

                  • sksxs1100
                    XStremely XSive
                    • Jul 2002
                    • 331
                    • Bridge city,TX (Beaumont area)

                    #10
                    I bought set of the standards... yes they squeal but i also needed the other parts with it.. they work good... but i can deal with the squeal...
                    Shawn
                    78 XS1100E "Black Rat"
                    78 XS1100E Parts
                    www.hotrod1972.com

                    Comment

                    • buickyouth
                      XStremely XSive
                      • Apr 2004
                      • 202
                      • Chicago, IL

                      #11
                      I had won a set a few days ago and have been waiting to hear back about shipping from the guy. I'll tell him to scrap the deal. Thanks for the heads up.
                      I am a rhinoceros and my skin is three feet thick.
                      //////////////WARSENAULT/////////////

                      Comment

                      • Geezer
                        XS-XJ Guru
                        • May 2003
                        • 2985
                        • Willamina, Oregon 97229

                        #12
                        Originally posted by buickyouth
                        I had won a set a few days ago and have been waiting to hear back about shipping from the guy. I'll tell him to scrap the deal. Thanks for the heads up.
                        That will most likely get you a non paying bidder alert on your account and bad feedback.

                        Geezer
                        Hi my name is Tony and I'm a bikeoholic.

                        The old gray biker ain't what he used to be.

                        Comment

                        • Winterhawk
                          XSive Maximus
                          • Jun 2004
                          • 684
                          • Missouri

                          #13
                          They might be Metalic brake pads. I think that the organic are quieter.
                          "We are often so caught up in our destination that we forget to appreciate the journey." "

                          Comment

                          • Geezer
                            XS-XJ Guru
                            • May 2003
                            • 2985
                            • Willamina, Oregon 97229

                            #14
                            Originally posted by Winterhawk
                            They might be Metalic brake pads. I think that the organic are quieter.
                            But the metalic pads break better.

                            Geezer
                            Hi my name is Tony and I'm a bikeoholic.

                            The old gray biker ain't what he used to be.

                            Comment

                            • Snow
                              XS-XJ Guru
                              • Oct 2002
                              • 1041
                              • Tallahassee, FL

                              #15
                              Originally posted by Geezer


                              But the metalic pads break better.

                              Geezer
                              But you don't really want brake pads to break do you? :P
                              1979 XS11F Standard - Maya - 1196cc (out of order)
                              1978 XS11E Standard - Nina - 1101cc
                              http://www.livejournal.com/~xs11

                              Comment

                              Working...