Announcement

Collapse
No announcement yet.

Stumbling at all RPM after trailering

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Ok, hopefully final update. I got fresh gas from a station across town, but before that even made it into my tanks, i decided to do as Skids did. I cut my pickup wires back a bit and butt crimped them to some longer wires. I ended up making the wires loop around the crank to give lots of slack room. I fired her up and she ran like a champ. Still might be suffering from some bad gas, as she didnt want to idle well (slow idle, but smooth). Ill do gas tomorrow after work and take her for a little longer ride than around the block.

    Hopefully this is it for this problem!
    1979 XS1100F "Roxy" (my first bike ) - '91 Suzuki GSX1100 Fairing, BMW bags, Cheap ABS Trunk, aftermarket cruiser seat, MAC 4-2 exhaust, Heavy Duty folding kickstart, XS11 Special signals and gauges, Blade Fuse Conversion, Dynacoil Greens w/ ballast bypass, SS brake lines

    Comment

    Working...
    X