Tweet
What is the correct Accel super coil kit for the XS1100SF 1979. Some came with the bike but I wanted to be sure they are right.
Will they require re jetting? Thanks for the help!
Will they require re jetting? Thanks for the help!
-
81 XS1100 Venturer
79 XS1100SF
78 XS650
77 XS750 triple
81 ZV750 cafe
75 CB550 cafe
74 CB350 Four
71 enduro 100
81 CB900C
79 Cm185T
Too much other stuff to list!!! -
Check this thread here....
No rejetting required
http://www.xs11.com/forum/showthread...er+accel+coilsLast edited by bikerphil; 09-26-2018, 04:47 PM.2H7 (79) owned since '89
3H3 owned since '06
"If it ain't broke, modify it"
☮ -
So the P/N 140403 is the right set for the bike? It came the same way as in the thread with distrubutor ends, but the PO got the red 90 boots and ends so I should be all set. Do you ---- can the resistor for the 3 ohm sets? Thanks for the help. Hope to get a pic to come through soon. For some reason they load but fail. Computers are not always my friend
81 XS1100 Venturer
79 XS1100SF
78 XS650
77 XS750 triple
81 ZV750 cafe
75 CB550 cafe
74 CB350 Four
71 enduro 100
81 CB900C
79 Cm185T
Too much other stuff to list!!!Comment
-
Yes the coils are the correct ones, unplug the ballast resistor and plug the ends of the harness wires together to bypass for these 3 ohm coils.
You will have to use a photo hosting site to post pictures, this forum will not post them directly.2H7 (79) owned since '89
3H3 owned since '06
"If it ain't broke, modify it"
☮Comment
Comment