Rear master cylinder?

[Nightengale]

I’m rebuilding my rear master cylinder. And when I took it apart all the rubber parts were in pieces. Does anyone have any pics or diagrams of how it goes back together. I have a new rebuild kit but not sure what goes where. I have fully cleaned the master cylinder body with my sonic cleaner. Also is there anywhere to get the rubber boot that goes on the outside of the piston on the master cylinder and the rubber part for the reservoir.

[XSSIVEUS]

Look at the exploded drawings for your model XS at:

http://store.speedandsportinc.com/index.tpl

A number of sites have the same drawings (e.g. Bike Bandit), but this is one I work with since they have stock of really rare parts.

Glen

[XSSIVEUS]

You can also buy shop parts manuals that provide drawings and parts lists. Handy tool for not many $.

[bikerphil]

You are probably better off buying a used MC to cannibalize parts from, those parts you mentioned are NLA.

[dansmith65]

Here's the pics from when I took mine apart:




Are you looking for this boot?


If so, I got mine from JSPayne who said he got it in a rebuild kit; I was surprised to hear that since mine didn't come with one.

[Nightengale]

Here's the pics from when I took mine apart:




Are you looking for this boot?


If so, I got mine from JSPayne who said he got it in a rebuild kit; I was surprised to hear that since mine didn't come with one.

.
All the kits I saw didn’t have one either! Thanks for the pics that helps a lot!

[xs11lover]

I have a few xtras if you need one. Not saying they are all clean and ready to go but good spares stored in my garage.