A few questions on wiring for my lights

[ThrottleJunky]

The previous owner changed a few things, and I'm trying to understand what's going on here. I will see if I can post a few pics.




The first is a pic of two wire connectors coming off the harness that fits under the seat. I have nothing to plug those into. On my other bike they travel forward and disappear into a loom.

The second pic is a few wires which had something to do with the fairing, perhaps. They are tied into the panel which I have shown in the third pic. I'm not sure if I can just disconnect them.

I have a few more questions, but will see if this works, first.

Darnit, how come it won't embed?

[ThrottleJunky]

I am not sure what is going on here. I am inserting the url like it is asking, and it's doing nothing. Can an administrator please edit that top post to take the "IMG" tags out? Now I can't even add the picture address. What am I doing wrong?

http://imgur.com/a/w28BD

[DiverRay]

Right click the image, select image location, and on the XS11 site select the square box with yellow and a square in the upper right corner. Click on the http inside the box that pops up, and right click then past.

[ThrottleJunky]

Right click the image, select image location, and on the XS11 site select the square box with yellow and a square in the upper right corner. Click on the http inside the box that pops up, and right click then past.

Thank you, Ray. That is exactly what I did. I have no clue why it didn't work. I tried it repeatedly.

PS- Would you be able to swap the 1st and 3rd pics? Otherwise, my post is confusing.

[DiverRay]

That better? or did I get the wrong pics?

[ThrottleJunky]

That better? or did I get the wrong pics?

Hahaha. Switch #1 and #2. Thanks!

[DiverRay]

OK, it's late for me as I get up at 4:50am Pacific....

[ThrottleJunky]

Thank you. Now, could you delete every one of my posts except for #1? Thanks!

[DiverRay]

So to the questions!
#1 spare wires for full dress kit, just leave them but zip tie them so they don't flop.
#2 disconnect and toss. wires tied to the AUX fuse for a radio or something.
#3 Connect with T.C. and buy one of the fuse panel kits he has. REPLACE THE GLASS FUSE PANEL! it WILL cause you a LOT of problems!!!
TC's kit has the "flag" connectors, so you need the proper crimp tool to use them. I got one for about $20 on ebay that works very well.

[ThrottleJunky]

So to the questions!
#1 spare wires for full dress kit, just leave them but zip tie them so they don't flop.
#2 disconnect and toss. wires tied to the AUX fuse for a radio or something.
#3 Connect with T.C. and buy one of the fuse panel kits he has. REPLACE THE GLASS FUSE PANEL! it WILL cause you a LOT of problems!!!
TC's kit has the "flag" connectors, so you need the proper crimp tool to use them. I got one for about $20 on ebay that works very well.

Good to hear. I already sent TC the money, and plan on it. Thanks, DiverRay!
PS- I have more pics I'll post tomorrow, but I need a new bulb for my test light before I ask more questions.