Free special fork seals

[skids]

I have a set of seals that I can not use because I think they are not for standards. They are K&S stock No. 16-1024. It says on the package 36mm x 48mm x 8/9.5mm (the seals are embossed with those numers too), I think the size for standards is 37mm x 49mm. The application chart on the back side says they should fit xs1100 E/F/G/H but I think it is in error. I could be wrong, but I think the size printed is for specials.

If you pay postage, they are yours.

[LakeOber]

I'm not sure if that is for a 1100 Special either. According to the K&S site, none of the 1100's use that part #: http://www.kandstech.com/index.php?page=yamahafork1300

I do see on the smaller XS bikes they do use that part # though: http://www.kandstech.com/index.php?page=yamahafork1000

However, I may not understand enough about these bikes. Are the forks on the 750's interchangeable with the 1100's?

[bikerphil]

Those seals are for a smaller bike, all the 11's have 37MM forks. The 11 Special's take 37X48X10.5