If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I just finished painting my tank and side covers on my 1980 Special. Does anyone make new side cover emblems? Mine are not too bad but would like new ones.
Thanks.
Bill
1980 XS1100 SG
Jardine Spaghetti with Harley Mufflers
The ones from Diablo are high quality not cheap mine were around 100.00 years ago and 54.00 each now. You will wait some time for them took me more than a month. You may need to put a little bow in them to make them fit the side cover properly. Do not try it by hand there are better ways just ask. I suggest you also use a double sided tape around the edges for 2 reasons. First they will not vibrate and wear the paint as they are heavy and the clips will allow them to slide a little. Second it will hold them on better than the clips and the last thing you want is for one to come off and slide down the road marring the shinny finish.
Last edited by ViperRon; 03-05-2017, 08:14 PM.
Reason: better info
To fix the problem one should not make more assumptions than the minimum needed.
Comment