Announcement

Collapse
No announcement yet.

Spark plug cap seal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Spark plug cap seal

    Hi, I just noticed that the spark plug cap seal on one of my spark plugs is missing. This is the one at the bottom of the cap that seals the spark plug. Does anyone have a source for just these rubber seals?
    79 F

  • #2
    I've never seen that part available by itself, only as part of a replacement plug cap.

    http://www.partsnmore.com/parts/yamaha/xs1100/?filters[fitting]=universal&filters[page]=7

    There are other sources as well, but this is what I could find quickly.

    T.C.
    T. C. Gresham
    81SH "Godzilla" . . .1179cc super-rat.
    79SF "The Teacher" . . .basket case!
    History shows again and again,
    How nature points out the folly of men!

    Comment


    • #3
      Originally posted by Padre4art View Post
      Hi, I just noticed that the spark plug cap seal on one of my spark plugs is missing. This is the one at the bottom of the cap that seals the spark plug. Does anyone have a source for just these rubber seals?
      Are you referring to the little rubber seal on the plug wire itself that seals it to the plug cap itself?
      81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top.

      Comment


      • #4
        Is this what you are looking for?
        https://www.z1enterprises.com/product/TU38-1003

        If so may as well get a full set and replace all four. I think 2 @90 and 2 @ 120 is the original set up but pretty much any angle will work.

        Phil
        1981 XS1100 H Venturer ( Addie)
        1983 XJ 650 Maxim
        2004 Kawasaki Concours. ( Black Bear)

        Comment


        • #5
          Our engine uses 14mm plugs so you would need LB05F for cyl 1 & 4, and XB05F for cyl 2 & 3.
          2H7 (79) owned since '89
          3H3 owned since '06

          "If it ain't broke, modify it"

          Comment


          • #6
            Thanks all . . . Very helpful!
            79 F

            Comment

            Working...
            X