Where do these O-rings Go?

sthomag

XSive

Join Date: May 2009

Posts: 60

Location:
- Share
- Tweet
#1

Where do these O-rings Go?

08-05-2016, 08:34 PM

I'm in the process of reassembling my top end. In the gasket set in the same little bag as the cylinder base o-rings and the valve seals are eight skinny little o-rings about 15mm in diameter.

Does anyone know where they are supposed to go? I'm stumped.
Tags: None
dbeardslee

XS-XJ Super Guru

Join Date: Nov 2007

Posts: 4385

Location: Maineville, OH
- Share
- Tweet
#2

08-05-2016, 08:43 PM

Originally posted by sthomag View Post

I'm in the process of reassembling my top end. In the gasket set in the same little bag as the cylinder base o-rings and the valve seals are eight skinny little o-rings about 15mm in diameter.

Does anyone know where they are supposed to go? I'm stumped.

Looking at the parts fiche (part #13) I think those are the o-rings that go under the valve guides. So unless you're replacing the guides, you won't need them.

I think I have a loose screw behind the handlebars.

'79 XS11 Standard, Jardine 4/1, Dyna DC1-1 Coils, 145 mains, 45 pilots, plastic floats - 25.7mm, XV920 fuel valves, inline fuel filters, speed bleeders, Mikes XS pods, spade-type fuse block, fork brace, progressive fork springs/shocks, manual petcocks, 750 FD, Venture cam chain tensioner, SS brake lines
Comment

Announcement