Tweet
Hi guys. What is the size nylon or copper washer to get for the oil plug so I won't over tighten? Thanks again everyone.
-
79 XS11SF -
Copper not nylon!.......and one that fits snugly over bolt threadsOriginally posted by dbmb0416 View Post
.
81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top. -
The size of that washer is 14MM.2H7 (79)
3H3
"If it ain't broke, modify it"
☮Comment
-
Thanks. Much appreciated.79 XS11SFComment
-
The crush washer from an old sparkplug will work. As long as you haven't crushed it down too many times taking the sparkplugplug in and out, it should still have a few uses left in it.Ken TalbotComment
-
Ignore him! Nylon is the cat's meow!Originally posted by motoman View PostCopper not nylon!.......and one that fits snugly over bolt threads.Skids (Sid Hansen)
Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.Comment
-
Hang around awhile longer.......you'll catch on as to what works and what doesn't for the long termOriginally posted by skids View Post
.
81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top.Comment
Comment