Announcement

Collapse
No announcement yet.

forks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • forks

    I have a 82 XJ trying to find seals wipers and bushings..... my suspension guy is having no luck. does anyone know the measurements of these parts?
    82 XJ11J

  • #2
    According to AllBalls Racing, these are the correct seals....

    http://www.allballsracing.com/55-112.html

    Bike bandit has the wipers....

    http://www.bikebandit.com/oem-parts/...7104#sch208832
    Last edited by bikerphil; 01-25-2016, 10:16 AM.
    2H7 (79) owned since '89
    3H3 owned since '06

    "If it ain't broke, modify it"

    Comment


    • #3
      The outer dust boots and seals can be gotten here:
      http://www.partsnmore.com/parts/yamaha/xj1100/?filters[category]=chassis&filters[fitting]=custom

      OEM dust boots (but no seals) are here: http://www.boats.net/parts/search/Ya...ORK/parts.html

      The inner bushings are long discontinued, about your only hope here is eBay if a set of NOS ones shows up but don't hold your breath. But unless the bike has a ton of miles on it or was abused badly, these generally don't wear enough to make much difference.
      Fast, Cheap, Reliable... Pick any two

      '78E original owner - resto project
      '78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
      '82 XJ rebuild project
      '80SG restified, red SOLD
      '79F parts...
      '81H more parts...

      Other current bikes:
      '93 XL1200 Anniversary Sportster 85RWHP
      '86 XL883/1200 Chopper
      '82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
      Cage: '13 Mustang GT/CS with a few 'custom' touches
      Yep, can't leave nuthin' alone...

      Comment


      • #4
        The fork seal size for the XJ11 is 37 X 50 X 11 mm
        2H7 (79) owned since '89
        3H3 owned since '06

        "If it ain't broke, modify it"

        Comment

        Working...
        X