Who's got shims to trade?

[randy]

I need the following shims,

250 - One

255 - One

290 - Three

295 - One

And have the following to trade:

275 - Two

300 - Four

Any takers?


Randy

[strom]

Hang on... will probabbly check this weekend

LP

[Snow]

I might still have a couple lying around I can send your way in that size range - I'll look also, not sure if I threw them out or not.

[nashville_bill]

I have a couple at home, but I'm a couple thousand miles away. I'll check on Wednesday and let you know.

[srq68]

I have some mixed in the garage, I'll check and let you know... Trade one for one...

[srq68]

Hey, I have one 295 and three 290 shims that you need. Will trade you for your two 275s and two 300s.

Email me directly at ldguilbert@usa.com
Thanks

[nashville_bill]

Randy,

I can't help. You don't need the ones I have.

Bill

[srq68]

Randy, I verified this AM, I have two 290s and two 295s. I also have four 285s if you can live with it...
Let me know.

[xswilly]

I haven't had the oppertunity to see a shim up close
but it seems to me that you can have your local machine shop
surface grind one down to what you need
just take a thicker one and have it surface ground to what you need
unless they are case hardened
anybody out there know