Oil Seal - Left Side

[RichV]

Can someone please give me a source for this oil seal. I need the kind that can be put in after the case is closed.

I thought I had one but it was the same as the right hand seal, which is smaller.

I ordered it from another source and they sent me the right one again.

I need to find someone that will send me the correct seal.

Thanks in advance.

[DiverRay]

It may be Friday, but I'll try and find the part number. I picked one up from the local auto parts house. They needed to order it, but it was at the local, SMALL warehouse, so it IS a common size. A GOOD parts house can look up a seal from the size, ID X OD X W, IE 36mm X 24mm X 4mm. No, this is NOT the size!!

[bikerphil]

Left Crank Seal (ign. side) - 32x48x8 Timkin/National 223215

If you go to your local bearing supplier they should have equivalent. Auto parts may have it if you supply the above part number.

[trbig]

If you type in the size (48x32x8) into Ebay, you'll get lots of options, but I recommend a double lipped seal like this.

http://www.ebay.com/itm/Metric-Oil-S...item232fe68704

[RichV]

Thanks everyone.

I ordered to one on ebay and should get it in a week or so.

I've got plenty else to do until then.