Tweet
i have a 79 1100 special
can anyone tell me the size of the center hole in the rotors
so i dont have to pull mine yet?
thanks
can anyone tell me the size of the center hole in the rotors
so i dont have to pull mine yet?
thanks
-
79 SF -
64mm , just like loads of other disks
XS1100 3X0 '82 restomod, 2H9 '78 chain drive racer, 3H3 '79 customized.
MV Agusta Brutale 910R '06.
Triumph 1200 Speed Trophy '91, Triumph 1200 '93.
Z1 '73 restomod, Z1A '74 yellow/green, KZ900 A4 '76 green.
Yamaha MT-09 Tracer '15 grey.
Kawasaki Z1300 DFI '84 modified, red. -
that is what i needed confirmed
thanks79 SFComment
-
If you're looking to do a disc swap, remember that the XS discs are dished and quite a bit thicker than most newer ones (.270" vs .2 to .225"). There are some aftermarket discs available for the XS, but most require shimming the caliper in or out; something you can't do with the special front brakes. EBC makes a XS11-specific rotor for these, but at $230 each a bit pricey.... http://www.650central.com/Last edited by crazy steve; 12-10-2014, 12:21 PM.Fast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...Comment
-
XS1100 3X0 '82 restomod, 2H9 '78 chain drive racer, 3H3 '79 customized.
MV Agusta Brutale 910R '06.
Triumph 1200 Speed Trophy '91, Triumph 1200 '93.
Z1 '73 restomod, Z1A '74 yellow/green, KZ900 A4 '76 green.
Yamaha MT-09 Tracer '15 grey.
Kawasaki Z1300 DFI '84 modified, red.Comment
Comment