Tweet
Found a thread of which tubes will bolt into the stock trees.
http://www.xs11.com/forum/showthread.php?t=27874
I don't really see any of these being "upgrades"...unless I'm missing something they all seem like the same setup just slightly different. No performance increases to be had there...
I'm going to start the hunt for a whole new front end and hopefully find something by the fall. List of front ends I'm looking for if anyone knows of a set laying around:
'Busa
Yamaha YZF750 (94-98) SIX PISTION!!
Yamaha FZR1000 (ALL Years)
For the YZF and the FZR, I'm going to need to swap out the springs for some heavy duty single rate but if I can track down a 'busa front end I'll just machine down the top tree bearing and call it a day.
Should be an adventure like always...
Suzuki GSXR1100 (Years with 18" Wheel)
http://www.xs11.com/forum/showthread.php?t=27874
I don't really see any of these being "upgrades"...unless I'm missing something they all seem like the same setup just slightly different. No performance increases to be had there...
I'm going to start the hunt for a whole new front end and hopefully find something by the fall. List of front ends I'm looking for if anyone knows of a set laying around:
'Busa
Yamaha YZF750 (94-98) SIX PISTION!!
Yamaha FZR1000 (ALL Years)
For the YZF and the FZR, I'm going to need to swap out the springs for some heavy duty single rate but if I can track down a 'busa front end I'll just machine down the top tree bearing and call it a day.
Should be an adventure like always...
Suzuki GSXR1100 (Years with 18" Wheel)
Comment