Announcement

Collapse
No announcement yet.

Emulsion Tube Order

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Emulsion Tube Order

    Asking for a friend and I am getting sick of going through thread after thread and not finding the right info.

    79 special emulsion tubes. 2 of the tubes are 266 with 4 rows of 4 holes and I do not know the number on the other 2 tubes but they have 2 rows of 2 holes and 2 rows of 3 holes. Which ones go in the middle and which ones go on the outside?
    Nathan
    KD9ARL

    μολὼν λαβέ

    1978 XS1100E
    K&N Filter
    #45 pilot Jet, #137.5 Main Jet
    OEM Exhaust
    ATK Fork Brace
    LED Dash lights
    Ammeter, Oil Pressure, Oil Temp, and Volt Meters

    Green Monster Coils
    SS Brake Lines
    Vision 550 Auto Tensioner

    In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.

    Theodore Roosevelt

  • #2
    The holes are air bleed holes, therefore the tubes with the least holes (richer mixture) go on the inboard 2 & 3 cylinders.
    2H7 (79)
    3H3

    "If it ain't broke, modify it"

    Comment


    • #3
      Originally posted by bikerphil View Post
      The holes are air bleed holes, therefore the tubes with the least holes (richer mixture) go on the inboard 2 & 3 cylinders.
      That is what I figured but I just wanted to double check. Thanks Phil!!
      Nathan
      KD9ARL

      μολὼν λαβέ

      1978 XS1100E
      K&N Filter
      #45 pilot Jet, #137.5 Main Jet
      OEM Exhaust
      ATK Fork Brace
      LED Dash lights
      Ammeter, Oil Pressure, Oil Temp, and Volt Meters

      Green Monster Coils
      SS Brake Lines
      Vision 550 Auto Tensioner

      In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.

      Theodore Roosevelt

      Comment


      • #4
        No problem, good luck!
        2H7 (79)
        3H3

        "If it ain't broke, modify it"

        Comment

        Working...
        X