Announcement

Collapse
No announcement yet.

Yics

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Yics

    Does anyone know if the YICS tool for the XJ1100 will work on a XJ550 or not? I think the carb spacing and tube diameter would pretty much have to be the same and don't know if it is.

    OOPS.. Feel free to delete this post. I see Webcraft already asked down in th eother bike section.
    Last edited by trbig; 01-06-2014, 10:16 AM.
    Try your hardest to be the kind of person your dog thinks you are.

    You can live to be 100, as long as you give up everything that would make you want to live to be 100!

    Current bikes:
    '06 Suzuki DR650
    *'82 XJ1100 with the 1179 kit. "Mad Maxim"
    '82 XJ1100 Completely stock fixer-upper
    '82 XJ1100 Bagger fixer-upper
    '82 XJ1100 Motor/frame and lots of boxes of parts
    '82 XJ1100 Parts bike
    '81 XS1100 Special
    '81 YZ250
    '80 XS850 Special
    '80 XR100
    *Crashed/Totalled, still own

  • #2
    The YICS tool is universal, it will fit all of the JX models that have the YICS passage. Unless you have one that was made before 4/1/2009, the early Eliminators were bike specific.

    Ride safe,
    Larry
    Inventor of the YICS Eliminator. Want one? Get it here.
    http://www.xs11.com/forum/showthread...399#post183399

    If you're not riding, you're not living!
    82 XJ1100
    80 XS1100G (Project bike)
    64 Yamaha YA-6
    77 Suzuki TS-185

    79 XS1100SF Built this one for a friend.
    See it here... http://www.youtube.com/watch?v=cBYT4C9_6Ac

    Comment

    Working...
    X