Tweet
Just as the title says. I read an article on bikez.com or whatever and it kept mentioning the oil cooler. I was no aware of earlier models having it.
-
1979 XS1100F
2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights. -
Only the '81h had them from the factory.Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore Roosevelt -
I think the 850's came with them too, but I'd have to verify with the fiche to be sure.Hi, my name is George & I'm a twisty addict!
80G (Green paint(PO idea))
The Green Monster
K&N A/F, TC's fuse block, '81 oil cooler, TC's homemade 4-2 w/Mac Mufflers, Raptor 660 ACCT
Got him in '04.
bald tire & borrowing parts
80SG (Black w/red emblems & calipers)
Scarlet
K&N A/F, TC's fuse block, WJ5, Shoei bags, Raptor 660 ACCT.
Got her in '11
Ready for the twisties!
81H (previously CPMaynard's)
Hugo
Full Venturer, Indigo Blue with B/W painted tank.
Cold weather rideComment
-
Yes, the 850's did. But, the article made it sound like they were riding a '78.1979 XS1100F
2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights.Comment
-
They came out on the very first model in 78 right through till the last ones, anywhere but in the US.79 SF Special W/ Stock all original motor @ 384,000klms
Stock exhaust, stock airbox, XJ sump, 78E carbs, Xs1100RH seat, Bosch superhorns, 5/8ths front M/c, braided lines, sintered SBS pads, drilled discs, progressive springs, 8" 50w HID headlight 4300K, 2 x 50w HID spiral driving lights, KONI shocks, Spade fuse box
*Touring mode - Plexistar 2 screen, Gearsack rack & bag & saddlebags, homebuilt towbar
*"The Keg"- UC torana hubs, XS11 discs, Tokico 4 spot calipersComment
-
Euro Bike ?
Ian, is it possible that they were testing a Euro XS1100/ XS1.1 as they came with oil coolers from the factory in years other than 1981.Comment
-
http://www.motorcyclespecs.co.za/mod...s1100%2078.htm
DCII- Yes, good catch. I did not even notice the top pic being a Euro "E", let alone the website probably being non-US.1979 XS1100F
2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights.Comment
-
Definitely. All XS1100 European bikes had the oil cooler as standard. It seems ironic, given that the UK can be cold a lot and rarely has a summer like say, in Texas...where the XS didn't have an oil cooler as standard. I've never been able to figure it out, actually. Anyone have any ideas? Oil cooler in temperate, often cold countries, no oil cooler in USA where it can be rather hot?Originally posted by DCII View PostXS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.Comment
-
My only thought would be that there is perhaps less traffic congestion on the whole in the USA? Never been across the big pond, so I am guessing only.Life is what happens while your planning everything else!
When your work speaks for itself, don't interrupt.
81 XS1100 Special - Humpty Dumpty
80 XS1100 Special - Project Resurrection
Previously owned
93 GSX600F
80 XS1100 Special - Ruby
81 XS1100 Special
81 CB750 C
80 CB750 C
78 XS750Comment
-
Simple. Us spec bikes didn't come fitted with them due to the blanket 55mph speed limits in force at the time.
Anywhere else, you could let them rip, comparatively.79 SF Special W/ Stock all original motor @ 384,000klms
Stock exhaust, stock airbox, XJ sump, 78E carbs, Xs1100RH seat, Bosch superhorns, 5/8ths front M/c, braided lines, sintered SBS pads, drilled discs, progressive springs, 8" 50w HID headlight 4300K, 2 x 50w HID spiral driving lights, KONI shocks, Spade fuse box
*Touring mode - Plexistar 2 screen, Gearsack rack & bag & saddlebags, homebuilt towbar
*"The Keg"- UC torana hubs, XS11 discs, Tokico 4 spot calipersComment
-
You sure that's the reason? Our speed limit was, and still is, only 60mph out of town roads, mostly and only 70 on our motorways/freeways.mOriginally posted by Eveready1100 View PostXS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.Comment
-
I imagine there are any number of reasons why they did not put an oil cooler on the XS11 until 1981 and even then only on the H model in the North American market My first thought was that it was excluded due to cost and the price point they needed to be at in order to be competitive versus Honda, Suzuki and Kawasaki. They may even have taken into consideration the number of owners who would install custom exhaust systems which would have caused routing problems with the oil hoses. Or maybe their engineers felt the benefits of the coolers was negligible for most owners? I doubt that this question will ever be answered with any certainty and your guess is as good as mine as to why they were not oe.Comment
-
I think you need to look at the UK bikes as being Euro bikes and they all had oil coolers, the Germans loved the XS11 and they had and still have unlimited stretches of Autobahn where you could sit at 120mph.
Only problem now, you have to get outta the way of the big BMW/Audi/Merc drivers howling up behind you
Tom
1982 5K7 Sport, restored to original from a wreck
1978 2H9 (E), my original XS11, mostly original
1980 2H9 monoshocked (avatar pic)http://i145.photobucket.com/albums/r...psf30aa1c8.jpg
1982 XJ1100, waiting resto to originalComment
-
And at the other end of the globe, some preproduction XS11's were tested in outback Queensland, and the neighboring state (Territory) until just recently had no speed limits on the highways, so I'd say they allowed for this as well.79 SF Special W/ Stock all original motor @ 384,000klms
Stock exhaust, stock airbox, XJ sump, 78E carbs, Xs1100RH seat, Bosch superhorns, 5/8ths front M/c, braided lines, sintered SBS pads, drilled discs, progressive springs, 8" 50w HID headlight 4300K, 2 x 50w HID spiral driving lights, KONI shocks, Spade fuse box
*Touring mode - Plexistar 2 screen, Gearsack rack & bag & saddlebags, homebuilt towbar
*"The Keg"- UC torana hubs, XS11 discs, Tokico 4 spot calipersComment
-
In that case, it was put on to look cool. Which it does.....
XS1100F 1980 European model. Standard. Dyna coils. Iridium plugs. XS750 final drive (sometimes). Micron fork brace. Progressive front springs. Geezer regulator/rectifier. Stainless 4 into 2 exhaust. Auto CCT (Venturer 1300) SOLD. New project now on the go. 1980 European model.Comment
Comment