Announcement

Collapse
No announcement yet.

Correct assembly of MC kit

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Correct assembly of MC kit

    Would someone please steer me straight on the proper way to assemble this rebuild kit for a '79 rear mc? Here are the parts--

    [/URL][/IMG]

    I got the bigger seal in place but wasn't sure of the sequence of parts from there as well as right side up vs. upside down

    Want to make sure the bike stops once it's rolling, Thanks.
    Billy

    1982 XJ1100, Ceramic Coated Headers, Raptor ACCT, Barnett Clutch Springs, Dremmel Fix, TC's Fuse Block, De-Linked S/S Brake Lines, 850 Final Drive, Yahman's YICS Eliminator, Pods, stock jets
    Tags: None
  • #2
    Hey Billy,

    You have the parts laid out in the order in which they go on the end of the plunger. The washer covers the holes, the rubber seal goes on cup side up as shown, then the metal fitting that protects the seal from the spring. The small end of the spring then goes into that metal fitting.

    Hope that helps you out.
    Life is what happens while your planning everything else!

    When your work speaks for itself, don't interrupt.

    81 XS1100 Special - Humpty Dumpty
    80 XS1100 Special - Project Resurrection


    Previously owned
    93 GSX600F
    80 XS1100 Special - Ruby
    81 XS1100 Special
    81 CB750 C
    80 CB750 C
    78 XS750

    Comment

    • #3
      It helps big time! I bought the mc on Ebay and most of the pieces were missing from the plunger when I took it apart so I had nothing to compare with. Thanks, now I can put it back together tomorrow.

      And congrats on the 9,000 post milestone...that's dedication!
      Billy

      1982 XJ1100, Ceramic Coated Headers, Raptor ACCT, Barnett Clutch Springs, Dremmel Fix, TC's Fuse Block, De-Linked S/S Brake Lines, 850 Final Drive, Yahman's YICS Eliminator, Pods, stock jets

      Comment

      Previous template Next
      Working...
      X