Tweet
There is a crack along the circumference of one of my air box boots where the hose clamp goes on. I tried to use seal-all and a piece of rubber inner tube but it would not stick. It must be a good hold because the hose clamp will split it open. Any ideas? It seems that boots are hard to come by. Thanks. Doug
-
81H Venture - hope to ride summer 2013
79F Cafe Racer at Some Point;
68 CB175 Sloper - Cafe Racer
74 KZ400 - Restoration project nightmare
62 BSA Super Rocket - In Pieces
72 CB100 Super Sport - Not super or sporty but fun -
I would buy some of this:
And clean the rubber well with alcohol first. Apply a layer of tape and allow to overlap.
Get a larger clamp if needed.
JohnJohn is in an anonymous city with an Alamo (N29.519227,W-98.678980)
Go ahead, click on the bikes - you know you want to...the electrons are ready.
'81 XS1100H - "Enterprise"
Bob Jones Custom Navy bike: Tkat brace, EBC floating rotors & SS lines, ROX pivot risers, Geezer rectifier, new 3H3 engine
"Not all treasure is silver and gold" -
It looks interesting. I will try to source this stuff today.81H Venture - hope to ride summer 2013
79F Cafe Racer at Some Point;
68 CB175 Sloper - Cafe Racer
74 KZ400 - Restoration project nightmare
62 BSA Super Rocket - In Pieces
72 CB100 Super Sport - Not super or sporty but funComment
Comment