MNS Black paint for frame/engine parts

[BA80]

I haven't tried this clear on engine case .I read through the specifics, as can you, and I couldn't find anything about yellowing or heat resistance. It just says absolutely nothing about either. You might contact them and ask. Being a 2 part urethane coating it will be much stronger than others.

It resists fuel like nobobys buisiness though, don't ask how I know that. And resists scratches and chips also.

The duplicolor works just fine as a color coat, actually I think I used Auto Zones house brand (Valucraft) paint for the color on my tank then this clear over it.

The clear is what makes the job. Just follow the directions.

[XS1100_OEM4ME]

Colors

Here it is is any color

http://www.66autocolor.com/SprayMax_.../spm-mix2k.htm

I haven't found any other colors than this in 2 part paints in a can but I can tesify that THIS STUFF is bullet proof.

I cleared my tank with it and it's hard as a rock and gas doesn't touch it. It does require sanding in steps down to a very fine grit to get a shine without orange peel but it would work on the frame with less work than that.

[BA80]

COOL!!!! I've been searching all over the net and couldn't find that.

You da man!

[BA80]

I see in there that you can send in a sample to custom match. I wonder if they can match the Macho Maroon for my E.

This stuff IS bulletproof. Worth the money.

A little extra work to smooth it out and get the orange peel out but it's hard as a rock.