Tweet
Fairing support bracket measurements
Sure, no problem.
See if this is what you need. It should be fairly easy to fabricate this assembly if you need one.
what the pic doesn't show properly is the 25 to 30 degree bend in the lower bracket so the channel 'U' will align with the upper head post bracket where the clamps hold up this assembly
Jeff
Originally posted by natemoen
View Post
See if this is what you need. It should be fairly easy to fabricate this assembly if you need one.
what the pic doesn't show properly is the 25 to 30 degree bend in the lower bracket so the channel 'U' will align with the upper head post bracket where the clamps hold up this assembly
Jeff
Comment