High RPM repost

[petejw]

hi nate,
keep an eye on ur plugs, the float heights
u set them at are on the rich side, if u notice
any bogging down on acceleration id be putting
the float heights back to stock. jat

[Tat2demon]

Let me know when you want it Dave.

Everything seems to be fine now with the floats set there. Even after using the colortune I was running way rich so dialed in the idle screws a little and the plugs look great now.

[Diskman01]

Let me know when you want it Dave.

Everything seems to be fine now with the floats set there. Even after using the colortune I was running way rich so dialed in the idle screws a little and the plugs look great now.

haha ok. My #3 idle screw is broken so not much I can do there until I get it replaced.. I tried getting the busted tip out but gave up after an hour. Need to pick up a pick set and spend an afternoon with it. I just fiddle with the float levels anyways. I got my carb removal down to 2 minutes.

I'm also building a lift table soooon!