Announcement

Collapse
No announcement yet.

1982 XJ 1100 yamaha maxim boots?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1982 XJ 1100 yamaha maxim boots?

    Where does one get these?

    thanks,
    L.
    1982 XJ1100J Maxim
    2000 BMW R1200C

    “We go to heaven for the climate, hell for the company.” – Mark Twain

  • #2
    What KIND of Boots, Intake manifold boots, Fork Tube Boots???

    T.C.
    T. C. Gresham
    81SH "Godzilla" . . .1179cc super-rat.
    79SF "The Teacher" . . .basket case!
    History shows again and again,
    How nature points out the folly of men!

    Comment


    • #3
      sorry - the boots between the carbs and the heads -- intake?

      All I know is I was told "your boots need to be replaced," while said person pointed at the tiny cracks there.
      1982 XJ1100J Maxim
      2000 BMW R1200C

      “We go to heaven for the climate, hell for the company.” – Mark Twain

      Comment


      • #4
        (How do you add a photo?)
        1982 XJ1100J Maxim
        2000 BMW R1200C

        “We go to heaven for the climate, hell for the company.” – Mark Twain

        Comment


        • #5
          Just because there are little cracks does not mean they need to be replaced. These are dual layer boots and they can have cracks in the outer layer that don't go into the inner layer and they are still fine. The only way to tell is to spray something flammable with the engine running around the boots (engine start fluid or something like that) and see if the engine idle speed changes, if it does they they are leaking and need replaced (or the gaskets are leaking). If you need to replace them are the same for the XJ1100 as for the XS1100.
          Cy

          1980 XS1100G (Brutus) w/81H Engine
          Duplicolor Mirage Paint Job (Purple/Green)
          Vetter Windjammer IV
          Vetter hard bags & Trunk
          OEM Luggage Rack
          Jardine Spaghetti 4-2 exhaust system
          Spade Fuse Box
          Turn Signal Auto Cancel Mod
          750 FD Mod
          TC Spin on Oil Filter Adapter (temp removed)
          XJ1100 Front Footpegs
          XJ1100 Shocks

          I was always taught to respect my elders, but it keeps getting harder to find one.

          Comment


          • #6
            There are several sources for the boots IF you decide you want or need to replace them...because they actually ARE leaking, or you just want nicer looking intakes.... CY, he does also ride a BEAMER!

            Partsnmore.com, ebay, I think GeorgeFix on ebay, varying prices, but usually around $100.00 a set of 4.

            As stated, if they are NOT leaking, you can dress them up also...think there are tech tips about this, from slathering on lots of black RTV, or spraying or painting on many layers of plastidip.

            T.C.
            T. C. Gresham
            81SH "Godzilla" . . .1179cc super-rat.
            79SF "The Teacher" . . .basket case!
            History shows again and again,
            How nature points out the folly of men!

            Comment


            • #7
              Thank you both. As I've posted elsewhere here, it had been running rough recently and a shop that is typically well respected here gave me two pieces of advice that have been questioned on this esteemed group:

              needs a carb rebuild;
              needs new boots.

              I would be happier if it didn't really need either.

              My friend Dan, an old bike expert, will be visiting in a couple of days and will help me figure out both.

              I bought a few cans of Seafoam, and will try the boot test as Cy suggested.

              (I had tried to sell my beautiful XJ due to back issues and poor suspension on these old bikes, but the bidding never got within my $2549 minimum, so I will keep it.)
              1982 XJ1100J Maxim
              2000 BMW R1200C

              “We go to heaven for the climate, hell for the company.” – Mark Twain

              Comment

              Working...
              X