Announcement

Collapse
No announcement yet.

Checking the oil level

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Checking the oil level

    I bought an old xs11 and it did not come with the dipstick for the final drive and middle gear can anyone give me the measurements of how large it is and were the marks are so i can make one.

    Thanks a bunch in advance

  • #2
    http://www.xs11.com/forum/showthread.php?t=72

    If you go to member CatatonicBug's website (find any post by him, there'll be a link in his sig), he's got a little PDF that will print out disposable paper ones...
    Fast, Cheap, Reliable... Pick any two

    '78E original owner - resto project
    '78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
    '82 XJ rebuild project
    '80SG restified, red SOLD
    '79F parts...
    '81H more parts...

    Other current bikes:
    '93 XL1200 Anniversary Sportster 85RWHP
    '86 XL883/1200 Chopper
    '82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
    Cage: '13 Mustang GT/CS with a few 'custom' touches
    Yep, can't leave nuthin' alone...

    Comment


    • #3
      Looks like the page the printable stick is supposed to be on is gone.
      Nate

      78 XS11 "Matilda" 2H7 000364

      2001 Raptor ACCT, T.C. Fuse Box, TC Bros Forward Controls
      Kuryakyn Iso Grips/Throttleboss/Bar End Mirror, Custom Covered Seat
      Shinko 712s, HID Headlight, RC Performance Exhaust
      Bikemaster Daytona Handlebars, Galfer SS Brake Lines
      Barnett HD Clutch Springs, T.C. Spin On Filter Adapter
      K+N Air Filter

      88 Voyager XII
      81 XJ650 Maxim

      Comment


      • #4
        Originally posted by Tat2demon View Post
        Looks like the page the printable stick is supposed to be on is gone.
        I just checked and it's still there. Just pulled it up and looked at it. Didn't bother to print it out as I have the actual dipstick which is still available from Mother Yamaha as it appears to still be used on some reasonably current models for less than $10.
        Cy

        1980 XS1100G (Brutus) w/81H Engine
        Duplicolor Mirage Paint Job (Purple/Green)
        Vetter Windjammer IV
        Vetter hard bags & Trunk
        OEM Luggage Rack
        Jardine Spaghetti 4-2 exhaust system
        Spade Fuse Box
        Turn Signal Auto Cancel Mod
        750 FD Mod
        TC Spin on Oil Filter Adapter (temp removed)
        XJ1100 Front Footpegs
        XJ1100 Shocks

        I was always taught to respect my elders, but it keeps getting harder to find one.

        Comment


        • #5
          Yep, its on Catonicbugs site but not in the first link from Steve.
          Nate

          78 XS11 "Matilda" 2H7 000364

          2001 Raptor ACCT, T.C. Fuse Box, TC Bros Forward Controls
          Kuryakyn Iso Grips/Throttleboss/Bar End Mirror, Custom Covered Seat
          Shinko 712s, HID Headlight, RC Performance Exhaust
          Bikemaster Daytona Handlebars, Galfer SS Brake Lines
          Barnett HD Clutch Springs, T.C. Spin On Filter Adapter
          K+N Air Filter

          88 Voyager XII
          81 XJ650 Maxim

          Comment


          • #6
            great thanks guys i looked but couldn't find anything earlier. now I'm set.

            Comment


            • #7
              You can also still buy them from the dealer for about $10.
              1980 XS850SG - Sold
              1981 XS1100LH Midnight Special (Sold) - purchased 9/29/08
              Fully Vetterized and Dynojet Kit added, Heated Grips, Truck-Lite LED headlight, Accel Coils, Irridium plugs, TKAT Fork Brace, XS850LH Final Drive & Black SS Brake lines from Chacal.
              Here's my web page devoted to my bike! XS/XJ User's Manuals there, and the XJ1100 Service Manual and both XS1100 Service manuals (free download!).

              Whether you think you can, or you think you cannot - You're right.
              -H. Ford

              Comment

              Working...
              X