new and has a few questions

[captjanes]

Here are a few item numbers on eBay to look at!



Mac Chrome 4-2 160808544000



T.C.

will this exhaust bolt right on to my bike?? will i need anything else to make it fit or do gaskets and everything come with it?

[BA80]

Gaskets not included. You may need different nuts to mount it to the head and some modifications to the muffler mounts.

[captjanes]

Gaskets not included. You may need different nuts to mount it to the head and some modifications to the muffler mounts.

where can i get gaskets?? is this bikes bolts and nuts all metric or standard? i would think it is metric. and how much modifications are needed? will i need to remove my center stand? sorry for the questions i just wanna make sure

[captjanes]

AJUSA.com is where I've gotten all my K&N's... cheapest place on the web.

is this the one that will fit my bike? do i need anything else or just plug and play?
http://www.ajusa.com/K-and-N-YA-1400...er-a1d120.html

[BA80]

For the 2 into one the center stand stays. One of the reasons I chose it. Gaskets are readily available at most bike shops or online ( ebay ect.). The mounts aren't tough at all if your even a little mechanically inclined. I fabricated mine from a simple 4" steel strap.

[bikerphil]

is this the one that will fit my bike? do i need anything else or just plug and play?
http://www.ajusa.com/K-and-N-YA-1400...er-a1d120.html

This one is correct, plug 'n play.

[BA80]

Does it come with oil and cleaner Phil?

[bikerphil]

Does it come with oil and cleaner Phil?

For $21 probably not. You can buy that recharge kit at auto parts for $10-$15.

[ddragon63]

they do not come with recharge kit... but are pre-oiled and ready to go. You can pickup a recharge kit @ any parts store... AJUSA.com drop ships em right from K&N. I've bought probably 10 filters from them for various vehicles over the last few years... Cycle Gear wanted $65 for the K&N for "Izzy" bought it for half that @ AJ's

[tv5150]

4 into 1 Black on eBay

Here's a black 4 into 1 that might interest you...

http://www.ebay.com/itm/261032579688...=p5197.c0.m619

[TopCatGr58]

Hey again,

I hope that was you that won that ebay pipe set, but if not, you haven't stated whether yours still has the OEM black MNS pipes or what??? Some photos of your bike would be nice to see.

IF they are still in decent shape aside from some small pinholes, you might be able to get them locally patched, then use some VHT black ceramic paint to get them close to matching the oem black color. Folks have drilled a few holes in the ends of the mufflers to get a bit more "throat" and tone from their pipes.

IIRC, the specials had longer exhaust studs, my MAC/JCWhitney's 4-1's went right on without any modification...used the supplied hex nuts and the muffler bracket just fine.

T.C.

[captjanes]

no i didnt win the exhaust i think im gonna go with the above ebay mac 4-2 system..i been looking for exhaust gaskets it is hard to find a supplier that ships to canada .. i found these on ebay but their crush type. should i use o-rings instead so i may be able to reuse them??

http://www.ebay.com/itm/YAMAHA-FJ110...d723da&vxp=mtr

[BA80]

no i didnt win the exhaust i think im gonna go with the above ebay mac 4-2 system..i been looking for exhaust gaskets it is hard to find a supplier that ships to canada .. i found these on ebay but their crush type. should i use o-rings instead so i may be able to reuse them??

http://www.ebay.com/itm/YAMAHA-FJ110...d723da&vxp=mtr

Those gaskets work fine.

Which system are you looking at? The only ebay link I see is the 4 into 1 black system.

[bikerphil]

Those in the ebay link should be fine. No need to use new gaskets every time the headers are removed. You can also get them and other items for your bike from PartsnMore who I believe is in Canada...

http://www.partsnmore.com/

[captjanes]

Which system are you looking at? The only ebay link I see is the 4 into 1 black system.

Mac Chrome 4-2 160808544000
theres no link just search it on ebay