Tweet
I'm getting ready to tear into my 79' XS1100, stripping it down to get the frame re done. When I put everything back together, I want to hide or take out any electrical I can that wont effect the bike. Can anyone give me some things I can take out?
-
79 SF -
There is not much that can be taken out due to the intersecting and branching circuits.
Not worth the time and effort.Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore Roosevelt -
okay, thanks for the quick reply79 SFComment
-
From a device stand point there are a few, flasher cancelling, RLU, headlight relay. From the point of the harness, not worth the effort.Life is what happens while your planning everything else!
When your work speaks for itself, don't interrupt.
81 XS1100 Special - Humpty Dumpty
80 XS1100 Special - Project Resurrection
Previously owned
93 GSX600F
80 XS1100 Special - Ruby
81 XS1100 Special
81 CB750 C
80 CB750 C
78 XS750Comment
-
No, but if you want to get rid of the reserve lighting unit, I would be interested in buying it. Also, if you want to get rid of the extra weight of the clip and wing nut thing that holds the kick start crank into the frame, I would be interested in that also.Originally posted by MCG89 View Post
Thanks, CZComment
Comment