Announcement

Collapse
No announcement yet.

Bar switch

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Bar switch

    Hi guys,

    Does anyone know if the right side handlebar switch that mikesxs has fits our 11's? The one I am thinking of (correct me if Im wrong) is Part #24-2060. Thanks again everyone!
    1979 XS1100 SF - My first project
    Tags: None
  • #2
    Yes they fit. They are wired different though but all you need to do is put your current wiring plug on the new one and it Is good to go.
    Nathan
    KD9ARL

    μολὼν λαβέ

    1978 XS1100E
    K&N Filter
    #45 pilot Jet, #137.5 Main Jet
    OEM Exhaust
    ATK Fork Brace
    LED Dash lights
    Ammeter, Oil Pressure, Oil Temp, and Volt Meters
    Green Monster Coils
    SS Brake Lines
    Vision 550 Auto Tensioner

    In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.

    Theodore Roosevelt

    Comment

    • #3
      It has been posted in previous threads that they will work, however, they are not direct plug and play, and that you will need to swap pins in the connectors. Several folks have done the swap, but they haven't posted HOW they swapped the pins...which colored wire to which location.

      I wish someone would so we could make a tech tip for it. You will probably need to get a 650 wiring diagram and compare it with your year of xs11 to be able to figure out what wires go where in the connectors!

      T.C.
      T. C. Gresham
      81SH "Godzilla" . . .1179cc super-rat.
      79SF "The Teacher" . . .basket case!
      History shows again and again,
      How nature points out the folly of men!

      Comment

      Previous template Next
      Working...
      X