Looking for new gaskets for the stock exhaust slip joints. Anyone know if the ones that mikesxs sells work for the 11? Also is there a gasket at the crossover joint or just at the 2&3 head pipe to collector joint? I don't see one listed on the fiche but it also states that 3 of the gasket are needed.
Announcement
Collapse
No announcement yet.
Exhaust Slip Joints
Collapse
X
-
Exhaust Slip Joints
Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore RooseveltTags: None
-
Originally posted by natemoen View PostLooking for new gaskets for the stock exhaust slip joints. Anyone know if the ones that mikesxs sells work for the 11? Also is there a gasket at the crossover joint or just at the 2&3 head pipe to collector joint? I don't see one listed on the fiche but it also states that 3 of the gasket are needed.
I had a Honda muffler that had the same diameter gasket in it, it was a little shorter than the Yamaha gasket, so you might see if you can find a real parts man at the local Honda shop, who would recognize it on sight. CZ
-
Order 'em from Yammy Nate.......part #3JJ-14653-00..........that's the part number off one of my extras in the packaging.81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top.
Comment
-
http://www.partsnmore.com/parts/yamaha/xs1100/?filters[fitting]=custom
Muffler Joint Gasket
#17-4522 | Yamaha XS1100 (1978-1981) US$ 6.00
Fits: XS1100 (78-81)
Muffler Joint Gasket 38.5mm x 44.5mm x 25mm OEM Ref#1L9-14714-01, 33M-14755-00, 3JJ-14653-00 Fits: HeadPipe79SF
XJ11
78E
Comment
-
Originally posted by SFerinTEXAS View Posthttp://www.partsnmore.com/parts/yamaha/xs1100/?filters[fitting]=custom
Muffler Joint Gasket
#17-4522 | Yamaha XS1100 (1978-1981) US$ 6.00
Fits: XS1100 (78-81)
Muffler Joint Gasket 38.5mm x 44.5mm x 25mm OEM Ref#1L9-14714-01, 33M-14755-00, 3JJ-14653-00 Fits: HeadPipe81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top.
Comment
-
Originally posted by motoman View PostThat part number I listed for u Nate IS for the #2,#3 head=pipe at the bottom and the cross-over connection. The only XS/XJ that would have a muffler gasket is the XJ. Not sure what SFerinTexas's point is.
Doesn't parts n more have some stupid minimum order $ amount?Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore Roosevelt
Comment
Comment