135.7 jets

[jjz28]

Hey guys, anyone have 2 137.5 jets? I found out why my bike was stuttering was because i had a broke jet, then i broke another one off. So, i need 2. If anyone has 2, i will buy them off of you. What is the part number for that jet if I need to go to parts n more or mikes xs or somewhere? THanks guys.

[natemoen]

No parts number necessary. They are mikuni large round main jets. Find a local shop and just go pick them up there.

[jjz28]

Thanks nate. I will try the honda shop tommorrow after work, since its on my way.

[natemoen]

Take an old one with you.

[BA80]

No doubt those need to be replaced but I seriously doubt thats where your stutter was coming from. Check your pilot jets and remove the needle jets (emulsion tubes) and make certain everything is clean and you have the correct parts in there.

JETS

MORE JETS

Make sure they say "genuine Mikuni"

[jjz28]

The emulsion tubes are why it was stuttering but i broke the jets putting them back it. I just barely turned it and the head broke off. I had broke one before and i just left the broke part in because i thought it was metered too but when i was cleaning the emulsion tubes, i realized that the end that was broke of in there had a huge hole through it, the head was the small hole of the jet. Anyway my emulsion tubes were dirty so i guess that was it, cause i have no more stumble but i tried screwing the heads of the jets in for my ride with xsivebiker today and i could not put the washer cause there wasnt enough threads so I left it out but it let the emulsion tube raise while riding, I rode 63 miles like that. Run like a raped ape, then run like crap. At least i made it home.

[jjz28]

DUH! I just saw your links, thanks!

[jjz28]

Neither one of those places have my jets. I need 137.5 large round jets.

[jjz28]

could someone tell me if these are the right jets. http://www.mikesxs.net/product/48-0120.html

[motoman]

Neither one of those places have my jets. I need 137.5 large round jets.

If I read sooner, could of saved you the trip to Honda. Honda owns Kiehn........Yamaha owns Mikuni. Where ever U get the jets, make sure they are Genuine Mikuni, not aftermarket like RD or K&L. They are the same in looks ONLY!

[bikerphil]

could someone tell me if these are the right jets. http://www.mikesxs.net/product/48-0120.html

Yes, those will work fine, I have used the MikesXS Mikuni knockoff large round main and pilot jets with no problems whatsoever.

[BA80]

Neither one of those places have my jets. I need 137.5 large round jets.

Did you look on these pages/

http://www.buyatvpartsonline.com/mikuni-carbs-jets-mikuni-100604-main-jets-c-699_702.html

This one you have to scroll down but they are there.

http://www.jetsrus.com/a_jets_by_carburetor_type/jets_mikuni_BS_series.htm

[mjpxs11sh]

+

dont know if u ordered them, but this is where i ordered mine. they are Mikuni OEM

http://www.nichecycle.com/Items.aspx?code=MIKUNIMAINJET&key=cat

[jjz28]

Thanks guys, i think i ordered them from niche cycle but i have to call to make sure. When i put in the order, i never got a conformation.

[jjz28]

Well, i dont think the order went through and no shop around here has them. I cant beleive they dont have jets just laying around in these shops. I have called 6 shops and noone has them. I am trying to get them before friday so i can ride this weekend.