Rubber baby buggy bumpers

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • CaptonZap
    XS-XJ Guru
    • Jun 2010
    • 1748
    • Denver

    #1

    Rubber baby buggy bumpers

    Would they be the same as the motor mounts?
    The parts list shows three different numbers for the motor mounts at the top front, bottom front, and rear of the engine case. Has anyone done any research on what the difference is? They all look to be the same size, so the next logical conclusion is that they are different durometers.
    Anyone know? IMWTK
    CZ
  • crazy steve
    XS-XJ Guru MODERATOR
    • Jan 2009
    • 7932
    • Beautiful outer Yelm, WA

    #2
    I think it's the size, not the rubber. They are slightly different (the rears have a cutaway on one side of the flange) if you look closely...
    Fast, Cheap, Reliable... Pick any two

    '78E original owner - resto project
    '78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
    '82 XJ rebuild project
    '80SG restified, red SOLD
    '79F parts...
    '81H more parts...

    Other current bikes:
    '93 XL1200 Anniversary Sportster 85RWHP
    '86 XL883/1200 Chopper
    '82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
    Cage: '13 Mustang GT/CS with a few 'custom' touches
    Yep, can't leave nuthin' alone...

    Comment

    • mxmikie
      XStremely XSive
      • Aug 2008
      • 482
      • Bouse az

      #3
      careful what you wish for.........you might get it

      Comment

      • crazy steve
        XS-XJ Guru MODERATOR
        • Jan 2009
        • 7932
        • Beautiful outer Yelm, WA

        #4
        Here's that thread updated in the 'modifications' forum....


        Besides the front/rear flange differences, I think there's a slight difference in the sleeve lengths, but you'll have to verify that.
        Fast, Cheap, Reliable... Pick any two

        '78E original owner - resto project
        '78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
        '82 XJ rebuild project
        '80SG restified, red SOLD
        '79F parts...
        '81H more parts...

        Other current bikes:
        '93 XL1200 Anniversary Sportster 85RWHP
        '86 XL883/1200 Chopper
        '82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
        Cage: '13 Mustang GT/CS with a few 'custom' touches
        Yep, can't leave nuthin' alone...

        Comment

        Working...