Tweet
The set of carbs I'm cleaning up now had 137.5 mains, 45 pilots and 266 x2 emulsion tubes across the bank. I want to set them up for a stock E config. but was wondering about jetting for the missing 301 x2's. Do you go up one size or two for the middle carbs. I know someone else has tinkered with these and I know it had a 4-1 exhaust but still had the original airbox on it. You figure thats why the PO changed the pilot to 45 from 42.5?
-
mack
79 XS 1100 SF Special
HERMES
original owner
http://i946.photobucket.com/albums/a...ps6932d5df.jpg
81 XS 1100 LH MNS
SPICA
http://i946.photobucket.com/albums/ad305/mack-055/2.jpg
78 XS 11E
IOTA
https://youtu.be/wB5Jfbp6SUc
https://youtu.be/RaI3WYHSuWA
Have recovery trailer and shop if you breakdown in my area.
Frankford, Ont, Canada
613-398-6186 -
'78 had 45's for pilot jets.Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore Roosevelt -
can't trust
anything. When talking about emulsion tubes a table was posted and it was wrong. Can't trust the clymers manual and when I asked about jetting (see dazed and confuse) that table is apparently wrong as well. I give up.mack
79 XS 1100 SF Special
HERMES
original owner
http://i946.photobucket.com/albums/a...ps6932d5df.jpg
81 XS 1100 LH MNS
SPICA
http://i946.photobucket.com/albums/ad305/mack-055/2.jpg
78 XS 11E
IOTA
https://youtu.be/wB5Jfbp6SUc
https://youtu.be/RaI3WYHSuWA
Have recovery trailer and shop if you breakdown in my area.
Frankford, Ont, Canada
613-398-6186Comment
Comment