Front Master Cylinder

[John]

Most of the Japanese bikes from the 80's had 5/8" bars, so most would bolt right up. Just get one that dual front discs. Some times the bore size is on the master cylinder.

[oldnortonrider]

7/8" ; not "5/8" inch .

[TonimusMaximus]

I got it and I like it. It's off an FJ1200. Nice lookin MC. I'll have to drill and tap a spot for the mirror, but that's no biggie. I like the sight glass and aluminum cap. I should be able to put my old handle on it with a little modification so that they'll match. Not a bad deal for $30.

[John]

7/8 not 5/8

[QUOTE]Originally posted by oldnortonrider
7/8" ; not "5/8" inch . [/QUOT

OOPS! Thanks for picking up on that.

[wildbill]

Originally posted by TonimusMaximus
I got it and I like it. It's off an FJ1200. Nice lookin MC. I'll have to drill and tap a spot for the mirror, but that's no biggie. I like the sight glass and aluminum cap. I should be able to put my old handle on it with a little modification so that they'll match. Not a bad deal for $30.

Thats a good deal.You will be on the road before you know it.Here I will have to wait till it warms up to do anything to my bike. Good luck

[TonimusMaximus]

I rifled through my tools and found a tap the same size as the stock side mirror hole on the old MC and I drilled a hole and tapped it today. Looks Good. I'm taking some steel wool to it and giving it a brushed look. From being stored incorrectly, brake fluid destroyed the finish. Next to rebuild some calipers.