Announcement
Collapse
No announcement yet.
did i do this right???
Collapse
X
-
did i do this right???
_____________________________________________ 1979 XS 1100 Special "The judge" mods- K&N air pods, 4-1 mac, 147.5 pilots, 57.5 mains, LED turn signal, cafe bars, HEL translucent yellow stainless steel brake line, dyna coil (dc2-1), raptor 660 mc, r6 controls..(sold)
1982 gs1100e "all business" cafe project
1980 gs1000g "stock"
1982 honda express "stretched 10 inch(my daughters scooter)
2008 jmstar 150cc Chinese scooter ( wife's bike)Tags: None
-
As long as you pre calibrated the gauges, looks good.Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore Roosevelt
-
Some XS guru should confirm this, but I would check #3 (and maybe #4) idle jet screws.... alltho this isnt the best tool to set those by.If it doesn't have an engine, it's not a sport, it's only a game.
(stole that one from I-dont-know-who)
Comment
-
will do seems like once i started messing with the idle jets anymore then they were it would start to rise and woulnt be synced anymore.. this is the closesest (maybe) i could get it..._____________________________________________ 1979 XS 1100 Special "The judge" mods- K&N air pods, 4-1 mac, 147.5 pilots, 57.5 mains, LED turn signal, cafe bars, HEL translucent yellow stainless steel brake line, dyna coil (dc2-1), raptor 660 mc, r6 controls..(sold)
1982 gs1100e "all business" cafe project
1980 gs1000g "stock"
1982 honda express "stretched 10 inch(my daughters scooter)
2008 jmstar 150cc Chinese scooter ( wife's bike)
Comment
-
As you have to gauges on there with the idle turned down nice and low turn the mixture screws and fund the spot with the highest vacuum for each cylinder, then your mixture screws are will set too.Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E
K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace
LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters
Green Monster Coils
SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore Roosevelt
Comment
-
i tried moving the mixture screws up and down it move the needle and this is the highest i could get it_____________________________________________ 1979 XS 1100 Special "The judge" mods- K&N air pods, 4-1 mac, 147.5 pilots, 57.5 mains, LED turn signal, cafe bars, HEL translucent yellow stainless steel brake line, dyna coil (dc2-1), raptor 660 mc, r6 controls..(sold)
1982 gs1100e "all business" cafe project
1980 gs1000g "stock"
1982 honda express "stretched 10 inch(my daughters scooter)
2008 jmstar 150cc Chinese scooter ( wife's bike)
Comment
-
Mixture screws have nothing to do with Vacuum unless synched first anyways. Even then the manometer is designed to do it's job at an idle for whichever machine it is attached too. To me it sounds like your idle is too high for the low readings you have. I would seriously check your valve timing marks just to be on the safe side. Ymmv2-79 XS1100 SF
2-78 XS1100 E Best bike Ever
80 XS 1100 SG Big bore kit but not fully running yet.
Couple of more parts bikes of which 2 more will live!
Comment
-
ill check my timeing asap... but im sure that is set fine._____________________________________________ 1979 XS 1100 Special "The judge" mods- K&N air pods, 4-1 mac, 147.5 pilots, 57.5 mains, LED turn signal, cafe bars, HEL translucent yellow stainless steel brake line, dyna coil (dc2-1), raptor 660 mc, r6 controls..(sold)
1982 gs1100e "all business" cafe project
1980 gs1000g "stock"
1982 honda express "stretched 10 inch(my daughters scooter)
2008 jmstar 150cc Chinese scooter ( wife's bike)
Comment
Comment