Announcement

Collapse
No announcement yet.

Throttle cable routing for CR33 Carbs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Throttle cable routing for CR33 Carbs

    Got a set of CR33 carbs. Had to convert the throttle to push/pull using a kit from Motion Pro. That went smoothly. But the throttle cable routing at the carbs is kicking my butt. I got instructions from a how to internet site, but the steps at the carb hookups looked backward from what would work. I've checked all sites that sell the carbs and the user's manual that came with the carbs is pretty bare bones. It looks like there are 3 positions for each cable. The pull function looks like it needs to run around the back (opposite of instructions).

    Anyone know where I can get a diagram to guide me through the routing or can you give me some hints?

    Thanks

  • #2
    why dont you post a link to the site you were looking at and just maybe we can brainstorm and get it figured out?More brains the better!
    1980 XS1100 SG
    Inline fuel filters
    New wires in old coils-outer spark plugs
    160 mph speedometer mod
    Kerker Exhaust
    xschop K & N air filter setup
    Dynojet Recalibration kit
    1999 Kawasaki ZRX1100
    1997 Jeep Cherokee 4.5"lift installed

    Comment

    Working...
    X