Is this seat for a SF?

[Rickrod3]

http://cgi.ebay.com/ebaymotors/ws/eB...TQ:MOTORS:1123

3H3-10 is the number the seller said is on the tag but; the back seems to have the tail light cut out.
I really want to know if this will work on a SG or later.

Rick

[jetmechmarty]

If that is an XS11 seat, it came off of a XS1100SH. If that is the case, it will fit a XS1100SG.

[DGXSER]

Interesting, I did not know there was a difference between the SG and SH seats. But I do know one will fit perfectly to the other. And that seat would definitely be for the 80-81. It is missing four of the rubber bumpers for the seat bottom.

[jetmechmarty]

The SG and SH seat pans are the same, even though the seats are different. SG is curved and SH has a step in it.

[jwhughes3]

don't forget

Don't forget the Standard seat pan is slightly shorter to accomodate the Standard tank and allow the seat to clip into the hold-down.

A Standard seat fits fine on a Special but hard the other way around.

John

[fredintoon]

- - - that seat would definitely be for the 80-81. It is missing four of the rubber bumpers for the seat bottom.

Hi Don,
and unless my aging eyes are playing tricks it don't have the seat hold-down fasteners either. Nice looking seat otherwise though.