Announcement

Collapse
No announcement yet.

Front M/C Bore?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Front M/C Bore?

    Does anyone know the bore diameter on the front brake m/c?

  • #2
    I think its 14mm.
    Nathan
    KD9ARL

    μολὼν λαβέ

    1978 XS1100E
    K&N Filter
    #45 pilot Jet, #137.5 Main Jet
    OEM Exhaust
    ATK Fork Brace
    LED Dash lights
    Ammeter, Oil Pressure, Oil Temp, and Volt Meters

    Green Monster Coils
    SS Brake Lines
    Vision 550 Auto Tensioner

    In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.

    Theodore Roosevelt

    Comment


    • #3
      Every one I've ever seen is marked 11/16", or just under 17.5 mm.
      Fast, Cheap, Reliable... Pick any two

      '78E original owner - resto project
      '78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
      '82 XJ rebuild project
      '80SG restified, red SOLD
      '79F parts...
      '81H more parts...

      Other current bikes:
      '93 XL1200 Anniversary Sportster 85RWHP
      '86 XL883/1200 Chopper
      '82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
      Cage: '13 Mustang GT/CS with a few 'custom' touches
      Yep, can't leave nuthin' alone...

      Comment


      • #4
        I should have added that that's true for all models except the '81 MNS and the XJ; those have the 'linked' brakes and the front master only operates one caliper. Those do use a 14mm bore I believe. And while these may look the same, you can't interchange them as braking operation will get strange...
        Fast, Cheap, Reliable... Pick any two

        '78E original owner - resto project
        '78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
        '82 XJ rebuild project
        '80SG restified, red SOLD
        '79F parts...
        '81H more parts...

        Other current bikes:
        '93 XL1200 Anniversary Sportster 85RWHP
        '86 XL883/1200 Chopper
        '82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
        Cage: '13 Mustang GT/CS with a few 'custom' touches
        Yep, can't leave nuthin' alone...

        Comment


        • #5
          Originally posted by crazy steve View Post
          I should have added that that's true for all models except the '81 MNS and the XJ; those have the 'linked' brakes and the front master only operates one caliper. Those do use a 14mm bore I believe. And while these may look the same, you can't interchange them as braking operation will get strange...
          Yep, that is true. The rear one on th LH is 3/4", while the XJ is 7/8" though.
          1980 XS850SG - Sold
          1981 XS1100LH Midnight Special (Sold) - purchased 9/29/08
          Fully Vetterized and Dynojet Kit added, Heated Grips, Truck-Lite LED headlight, Accel Coils, Irridium plugs, TKAT Fork Brace, XS850LH Final Drive & Black SS Brake lines from Chacal.
          Here's my web page devoted to my bike! XS/XJ User's Manuals there, and the XJ1100 Service Manual and both XS1100 Service manuals (free download!).

          Whether you think you can, or you think you cannot - You're right.
          -H. Ford

          Comment


          • #6
            That must be where I got it from then, Shoulda kept my mouth shut!
            Nathan
            KD9ARL

            μολὼν λαβέ

            1978 XS1100E
            K&N Filter
            #45 pilot Jet, #137.5 Main Jet
            OEM Exhaust
            ATK Fork Brace
            LED Dash lights
            Ammeter, Oil Pressure, Oil Temp, and Volt Meters

            Green Monster Coils
            SS Brake Lines
            Vision 550 Auto Tensioner

            In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.

            Theodore Roosevelt

            Comment

            Working...
            X