If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
So I order a stator from ebay, look at the white connector, its a bit melted, I figure who knows why..
Cut the (new melted ) connector off and replace it.
replacement stator works great, bike is charging... getting almost 14v at the battery...
ride a few miles and tac dies.. bike stops charging
white connector melted again
wires get real hot over 4k
guy sold me a bad stator?
Probably corrosion problems in the connectors. You have a quite a job of connector cleaning ahead of you. Be sure and pack them with dielectric grease afterward so you don't have the problem again...
Tweet
Comment