Announcement

Collapse
No announcement yet.

Clutch will not disengage

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Clutch will not disengage

    Took bike out for a short spin tonight, worked fine til I was almost home when I went to pull in clutch for a d/s it would not pull all the way. Got it home and I took off the cover(one w/2 screws) and the clutch wont move. cable is fine. I search threads and can not find a thing.
    '79 XS 1100F

  • #2
    The clutch cable seized, the throwout bearing threw itself out or the clutch pack packed up.

    Take off the clutch adjustment cover on the right side of the engine and see if you can lift the lever and move the clutch cable. That'll tell you if it's a stuck cable or something harder to fix!
    -- Scott
    _____

    2004 ST1300A: No name... yet
    1982 XJ1100J: "Baby" SS Brakes, '850 FD, ACCT
    1980 XS1100G: "Columbo" SS Brakes, '850 FD, ACCT
    1979 XS1100SF: "Bush" W.I.P.
    1979 XS1100F: parts
    2018 Heritage Softail Classic 117 FLHCS SE: "Nanuk" It's DEAD, it's not just resting. It is an EX cycle.

    Comment


    • #3
      nope wont move...looks like Im taking off the clutch cover to see what happened...
      '79 XS 1100F

      Comment


      • #4
        Got side off and took off star plate, and the big set screw in the middle of the clutch nut was out of the threads and sitting in the hole where it needs to be, sideways...I am sure this was problem, question do I go any further or can I reassemble and ride?
        '79 XS 1100F

        Comment


        • #5
          Look up TC's clutch thread it has lots o' pictures and should help you to put it back together.


          http://www.xs11.com/forum/showthread.php?t=9481
          Last edited by barberad; 08-02-2010, 01:43 PM.
          Current Rides: '82 XJ w/Jardine 4-1's, GIVI flyscreen, '97 Triumph Trophy 1200
          Former Rides: '71 CB350, '78 400 Hawk, '75 CB550/4;
          while in Japan: '86 KLR250, '86 VT250Z, '86 XL600R, '82 CB450(Hawk II), '96 750 Nighthawk, '96 BMW F650

          Comment


          • #6
            If your that far

            why not go the little bit more and check your friction and steels for tolerence. Check your spring lengths while your at it.
            mack
            79 XS 1100 SF Special
            HERMES
            original owner
            http://i946.photobucket.com/albums/a...ps6932d5df.jpg

            81 XS 1100 LH MNS
            SPICA
            http://i946.photobucket.com/albums/ad305/mack-055/2.jpg

            78 XS 11E
            IOTA
            https://youtu.be/wB5Jfbp6SUc
            https://youtu.be/RaI3WYHSuWA



            Have recovery trailer and shop if you breakdown in my area.
            Frankford, Ont, Canada
            613-398-6186

            Comment

            Working...
            X