Alternative Front Master Cylinder

[birdy]

Hey, I'm looking for a smaller master cylinder to fit on drag bars (7/8) with a 1/4 fairing. Any recommendations?

Ideally about 1cm thinner with the line coming out forward instead of toward the tree.

Thanks!

[Geezer]

Hey, I'm looking for a smaller master cylinder to fit on drag bars (7/8) with a 1/4 fairing. Any recommendations?

Ideally about 1cm thinner with the line coming out forward instead of toward the tree.

Thanks!

Any 14 or 16mm bore master cylinder for dual disks bikes with 7/8" bars will work. Look on fleabay for one from some sportsbike.

Geezer

[TomRodgers]

Mikes XS or PartsNmore have one that looks like this.....smaller overall size and the 'hole' out the front....



if the insertion works....

[81xsproject]

I really like my Nissin's. I think the brake master is from a CBR-F4i, but can't remember. Check out my hydro clutch mod link in my sig and i think at the end I made note of changing masters.

[WMarshy]

Im going to use a FJ front master cylinder once I get my FJ forks on...IDK what dia bars they fit... When Im ready for the hydro clutch mod I will use the FJ clutch master for that too!

[birdy]

cool, I'll cruise some auctions and such. Brembo MC's look nice, but $$$

Parts-n-more's looks like a good choice too..

Thanks for the responses