If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
'81 1100 MNS - "Midnight XSpress" Original except:
120 mains outer cylinders - 125 mains inner cylinders - Ceramic headers - Powder coated pipes, covers calipers, and MC's
4 pods - Air box gutted--E3 Plugs - High Back seat - Grooved out swing arm - SS brake lines
Fork brace - 160 speedo - Auto CCT
All gold paint and chrome replaced with GOLD plate
"STUPID is Forever" Ron White.
Contact me by PM -I don't deal with stupid anymore.
Careful what you rub.......would'nt want you to bring home more than a bar-fly.
81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top.
Man there ain't nothing like a good looking, good running XS. Yeah! 30 or 40 hardlys there and guess what everyone was looking at! Haven't cranked her in about 4 months but she busted right off. Took her for a short run (about 40 miles) and everything was fantastic. HELLO summer I'm ready!
'81 1100 MNS - "Midnight XSpress" Original except:
120 mains outer cylinders - 125 mains inner cylinders - Ceramic headers - Powder coated pipes, covers calipers, and MC's
4 pods - Air box gutted--E3 Plugs - High Back seat - Grooved out swing arm - SS brake lines
Fork brace - 160 speedo - Auto CCT
All gold paint and chrome replaced with GOLD plate
"STUPID is Forever" Ron White.
Contact me by PM -I don't deal with stupid anymore.
Since those pics I have redone the valve shims, modified the swing arm (I am running a 140 rear tire), installed a auto CCT, and installed a trubo shield. Will try to get pics and post today.
'81 1100 MNS - "Midnight XSpress" Original except:
120 mains outer cylinders - 125 mains inner cylinders - Ceramic headers - Powder coated pipes, covers calipers, and MC's
4 pods - Air box gutted--E3 Plugs - High Back seat - Grooved out swing arm - SS brake lines
Fork brace - 160 speedo - Auto CCT
All gold paint and chrome replaced with GOLD plate
"STUPID is Forever" Ron White.
Contact me by PM -I don't deal with stupid anymore.
Since those pics I have redone the valve shims, modified the swing arm (I am running a 140 rear tire), installed a auto CCT, and installed a trubo shield. Will try to get pics and post today.
Cant wait to see the pics. Looks great so far.
Four wheels move your body, two wheels move your soul.
ATGATT, It could save your life!
1980 XS 1100SG
Dyna 3 Ohm Hi Output Coils
Pod Filters
DynoJet Kit
T.C.'s Fuse Block
Slip Streamer Turbo Windshield
Custom Tank and Side Cover Decals
V-Max Auto CCT
1978 XS1100E K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters Green Monster Coils SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
'81 1100 MNS - "Midnight XSpress" Original except:
120 mains outer cylinders - 125 mains inner cylinders - Ceramic headers - Powder coated pipes, covers calipers, and MC's
4 pods - Air box gutted--E3 Plugs - High Back seat - Grooved out swing arm - SS brake lines
Fork brace - 160 speedo - Auto CCT
All gold paint and chrome replaced with GOLD plate
"STUPID is Forever" Ron White.
Contact me by PM -I don't deal with stupid anymore.
former owner
1981 xs1100 RH (aus) (5N5)
zrx carbs
18mm float height
145 main jets
38 pilots
slide needle shimmed .5mm washer
fitted with v/stax and uni pod filters
Comment