Tweet
hi, i lost the springs and balls for the enrichment detent locks. does anyone have a source?
-
1981 xs1100 midnight special
1983 750 midnight maxim
resurrected:
1977 goldwing
1980 cb750
North central Wisconsin -
i found the balls, but not the springs. anyone have a source, or a couple for sale?1981 xs1100 midnight special
1983 750 midnight maxim
resurrected:
1977 goldwing
1980 cb750
North central Wisconsin -
Try looking at your ball point bic pens or the like, see if the springs are small enough.Life is what happens while your planning everything else!
When your work speaks for itself, don't interrupt.
81 XS1100 Special - Humpty Dumpty
80 XS1100 Special - Project Resurrection
Previously owned
93 GSX600F
80 XS1100 Special - Ruby
81 XS1100 Special
81 CB750 C
80 CB750 C
78 XS750Comment
-
Springs measure:
8mm in length and 3mm in diameter
Balls measure:
3.13mm in diameter
Maybe a good hardware if there's any left
When I lost one of my balls 4 years ago, that is, uh, enrichment detent balls, I took apart a grease zerk only to find that the ball was too small and the spring too long and skinnier than the originals. I was replacing a bearing in my 4" grinder about a month ago and low and behold its balls measure: 3.12 mm in diameter
HTH
1980 XS1100G "Dolly G" Full Dresser (with a coat of many colors
)
1979 XS1100SF (stock-euro mods planned)
1984 XV700L Virago (to be hot-modded)
1983 XJ750MK Midnight Maxim (semi-restored DD)
1977 XS650D ( patiently awaiting resto)
Sometimes it takes a whole tank of gas before you can think straight.
Comment
-
Springs and balls for the enrichment detent
You can get them still from Yamaha.
I just order and received them both from:
Yamaha Parts Nation
3825 Lake Street
Kalamazoo MI 49048
Phone: 269-385-1540
Fax: 269-381-9145
Email: info@cyclepartsnation.com
Part #'s
583-14589-00-00 SPRING
93501-08001-00 BALL81 XS1100SH Special
80 Honda CBX SupersportComment
-
ahhhhh,,,,,,3.12 mm wtf
My calculator says that is one eighth of an inch ball, or 1/8 inch ,, or .125 inch ball,,Bikes Now.
80 MNS 11 pods,georgefix kit,stock jets, HD Sporty muffs
79 XS 11 Special, Emgo pods, stock jets, with Pacifico fairing, hard bags, intact stock pipes Sold
83 Yammi Venture with custom footboards, 20k miles.
83 Yammi Venture parts bike
99 Valkyrie shield and bags 37k miles like new
08 ZX 14 Kawa Ninja 6k miles SoldComment
-
Bike Bandit
Try Bike Bandit.78 XS1100E Standard
Coca Cola Red
Hooker Headers
http://i408.photobucket.com/albums/p...m/DSC00580.jpg
1979 XS1100 Special
http://i408.photobucket.com/albums/p...m/DSC00612.jpg
1980 XS Standard
http://i408.photobucket.com/albums/p...m/DSC01137.jpg
2006 Roadstar Warrior
http://i408.photobucket.com/albums/p...um/warrior.jpgComment
-
Yep. I replaced one of mine with a bearing ball from my old RC car tool-kit. Thankfully, I didn't loose either of the 2 springs.Originally posted by yamtom View Post1980 XS850SG - Sold
1981 XS1100LH Midnight Special (Sold) - purchased 9/29/08
Fully Vetterized and Dynojet Kit added, Heated Grips, Truck-Lite LED headlight, Accel Coils, Irridium plugs, TKAT Fork Brace, XS850LH Final Drive & Black SS Brake lines from Chacal.
Here's my web page devoted to my bike! XS/XJ User's Manuals there, and the XJ1100 Service Manual and both XS1100 Service manuals (free download!).
Whether you think you can, or you think you cannot - You're right.
-H. FordComment
Comment