Announcement

Collapse
No announcement yet.

While I got the wheel off...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    if you pushed in the rear pads earlier,
    you might only need to pump the rear
    brake pedal a few times to push the pads
    back out, try that before doing any adjustments.
    pete


    new owner of
    08 gen2 hayabusa


    former owner
    1981 xs1100 RH (aus) (5N5)
    zrx carbs
    18mm float height
    145 main jets
    38 pilots
    slide needle shimmed .5mm washer
    fitted with v/stax and uni pod filters

    [url]http://www.youtube.com/watch?v=3pA8dwxmAVA&feature=mfu_in_order&list=UL[/url]

    Comment


    • #17
      I couldnt get the caliper to loosen up so i cracked the bleeder and "rocked" the caliper to give me some wiggle room. I introduced air or something.
      1980 XS1100SG Special

      Comment

      Working...
      X