If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I do that and buy a cheap pair of bi focals at the dollar store.
BDF Special
80SG Vetter bagger 1196 Wiseco big bore kit, Mega Cycle Cams, slotted cam gears, ported and flowed head, bronze intake seats, Dyno Jet kit, Dyno coils and Mikes XS air pods, Venture cam chain adjuster,Geezer's regulator, Clutch mod, Mac 4 into 1 with custom built and tuned baffle, Oil cooler,MikesXS emulators mod.
Dyno tuned to 98 hp at the rear wheel.
I don't have a printer but if I had to have a large print diagram, I'd down load the following pic onto a memory stick and take it to a Kinko's or something:
Courtesy of XS11.com Member TopCatGr58
I'd go for a full Poster size and hang it on the wall somewhere. Not cause I'm fascinated with it or wanted to show it off.
Because if I ever took it down I'd get smudges/oil all over it.
BTW: Enlarging the diagram cause I'm admitting that my vision isn't what it was at age 20??? Not Gonna Happen.
Comment