xj carbs

[chevy45412001]

i no i no this might not be the right place for this but i need it seen. I am looking for two butterfly s (blades) for my carbs. Or a rack of carbs for my Xj.PO decided to bend the shj_ out of the two outboard carbs. Can not get the thing to settle down enough to idle proper or accelerate either.Any info or help would be greatly appreciated.

[kjohnson]

i have some carbs sitting around that might share butterflys. I'll try to check in short order.

[davidsymons53]

If kjohnson does not have the two butterfly s (blades) I do.

David

[davidsymons53]

kjohnson, I am looking for a #4 carb body (farthest to the right while facing forward) for an xj1100. do you have one?

David

[kjohnson]

chevy45412001:
Unfortunatly, the butterfly plates i have are not the correct size.

davidsymons53
I don't have any spare #4 carbs. Sorry.

[davidsymons53]

K. Johnson, thanks for your reply.

David

[davidsymons53]

chevy45412001, what is the number on the butterfly disk?

David

[chevy45412001]

?

not for sure what number is on them.I do know they had to be from xj though.I think they are 34mm.Could be wrong on that one though.Jerry you would know?i would also go for the whole rack,but those are getting a little harder to find these days.Did spot some on a motorcycle bone yard site to the tune of 225 plus shipping (ouch!)

[Jerry]

I would have to check. Don't know off the top of my had. I'll see if I can dig out the bike and take a look.