Brake lines

[olhogrider]

Just got my Galfer steel lines and the 2 from the splitter to the calipers were too short! Long story short (too short), the tape measure is about an inch and a half difference between the white side and the yellow! Guess which side I used? Now I have no brakes while I wait for another set to be made. For future reference, the top line is 18" and the 2 lower lines are 22" on a 1980 G.

Dan

[dragxs11]

Don't you hate that. I actually had a good experience with Merrian Cycle. I just had to tell them what my setup was, and they knew the measurements. However, I paid a little more for it.